I've been fielding questions about how to best cut OpenBeam, so we've done some testing.For hand tools, a good miter box and a good 32TPI hacksaw blade gives adequate results. Here's the 3D printed miter box from a few weeks ago:
Things to watch for: The extrusion should be secured from moving while it is being cut. For this, I use a De-Sta-Co hold down clamp, a fairly common clamp used in manufacturing engineering for tooling and fixtures.
The results are okay. It certainly cuts it fairly cleanly, but at the end of the day, it's still a hacksaw cut:
So, for anyone inclined, I've made available my Solidworks design file and the .STL file here. Files are released "as is", i.e. with no guarantees to work.
Full Disclosure: I've signed up as an Amazon.com affiliates, and if you're so inclined, you may order items that I've recommended / reviewed / mentioned in my blog through the links provided below. I receive a small commission from Amazon.com when you do so and it helps with defraying my R&D costs. Thanks!